Demo input file for 161/164

Bin/input_top.ini

@@ -0,0 +1,265 @@
+mcfm_version = 10.3
+
+[general]
+    # process number
+    nproc = 164
+    # part: lo, nlo, nnlo, nlocoeff, nnlocoeff
+    part = lo
+    # string to identify run
+    runstring = st_fiducial
+    rundir = st_fiducial
+    sqrts = 13000
+    # ih1, ih2: +1 for proton, -1 for antiproton
+    ih1 = +1
+    ih2 = +1
+    zerowidth = .false.
+    removebr = .false.
+    # electroweak corrections: none, sudakov or exact
+    ewcorr = none
+
+[nnlo]
+    # optional: tau cutoff for NNLO processes
+    taucut = 0.001
+
+[pdf]
+    # PDF label for internal routines
+    pdlabel = 'CT14.NN'
+
+[lhapdf]
+    # LHAPDF PDF label, multiple sets separated by spaces possible
+    lhapdfset = CT14nnlo
+    # LHAPDF PDF member number, specify for each set, separated by spaces
+    lhapdfmember = 0
+    # calculate PDF uncertainties.
+    # note: can only do PDF uncertainties or scale variation at the same time.
+    dopdferrors = .false.
+
+[scales]
+    renscale = 173.3
+    facscale = 173.3
+    dynamicscale = none
+    ;renscale = 1.0
+    ;facscale = 1.0
+    ;dynamicscale = DDIS
+    # perform scale variation
+    doscalevar = .false.
+    # can be 2 or 6 for 2-point or 6-point scale-variation
+    maxscalevar = 6
+
+[masses]
+    wmass = 80.385
+    # Higgs mass
+    hmass = 125
+    # Top-quark mass
+    mt = 173.3
+    # Bottom-quark mass
+    mb = 0.0
+    # Charm-quark mass
+    mc = 0.0
+
+[basicjets]
+    # Jet-inclusive cross section
+    inclusive = .true.
+    # Jet-clustering algorithm: ankt, ktal, cone, hqrk, none
+    algorithm = ankt
+    # minimum jet pT; can also have ptjetmax
+    ptjetmin = 30
+    # maximum jet rapidity; can also have etajetmin
+    etajetmax = 2.4
+    Rcutjet = 0.5
+
+[masscuts]
+    # minimum mass of 3-4 system
+    m34min = 0
+    # optional, maximum mass of 3-4 system, otherwise sqrts
+    # m34max = 14000
+    # minimum mass of 5-6 system
+    m56min = 0
+    # optional, maximum mass of 5-6 system, otherwise sqrts
+    # m56max = 14000
+    # minimum mass of 3-4-5-6 system
+    m3456min = 0
+    # optional, maximum mass of 3-4-5-6 system, otherwise sqrts
+    # m3456max = 14000
+
+[cuts]
+    # make additional cuts in this section
+    # make sure to modify src/User/gencuts_user.f90 for additional b-tagging requirements
+    makecuts = .false.
+
+    # minimum lepton pT; can also have ptleptmax
+    ptleptmin = 0.0
+    # maximum lepton rapidity, absolute value; can also have etaleptmin
+    etaleptmax = 99.0
+    # rapidity veto on leptons
+    etaleptveto = 0.0 0.0
+    # minimum missing pT
+    ptminmiss = 0.0
+
+    # minimum pT for additional leptons; can also have ptlept2max
+    ptlept2min = 0.0
+    # maximum rapidity for additional leptons, absolute value; can also have etalept2min
+    etalept2max = 99.0
+    # rapidity veto on additional leptons
+    etalept2veto = 0.0 0.0
+
+    # minimum (3,4) transverse mass
+    m34transmin = 0.0
+    # minimum R(jet,lept)
+    Rjlmin = 0.0
+    # minimum R(lept,lept)
+    Rllmin = 0.0
+    # minimum rapidity separation between jets
+    delyjjmin = 0.0
+    # enforce jets to be in opposite hemispheres
+    jetsopphem = .false.
+    lbjscheme = 0
+    # b-jet minimum pT; can also have ptbjetmax
+    ptbjetmin = 0.0
+    # b-jet maximum rapidity; can also have etabjetmin
+    etabjetmax = 99.0
+
+[photon]
+    # include fragmentation
+    fragmentation = .false.
+    # fragmentation set
+    fragmentation_set = GdRG__LO
+    # fragmentation scale
+    fragmentation_scale = 1.0
+    # minimum photon pT; can also have gammptmax
+    gammptmin = 40
+    # maximum photon rapidity; can also have gammrapmin
+    gammrapmax = 2.5
+    # second photon minimum pT
+    gammpt2 = 25
+    # third photon minimum pT
+    gammpt3 = 25
+    # minimum R(photon,lepton)
+    Rgalmin = 0
+    # minimum R(photon,photon)
+    Rgagamin = 0.4
+    # minimum R(photon,jet)
+    Rgajetmin = 0
+    # cone size for isolation
+    cone_ang = 0.4
+    # energy fraction for isolation
+    epsilon_h = 0.5
+    # exponent for smooth-cone isolation
+    n_pow = 1
+
+[histogram]
+    # write top-drawer histograms
+    writetop = .false.
+    # write raw table file for each histogram
+    writetxt = .true.
+    newstyle = .false.
+
+[integration]
+    # use sobol low discrepancy sequence
+    usesobol = .true.
+    # random number seed, when not using sobol, 0 means random
+    seed = 0
+    # relative precision goal
+    precisiongoal = 0.001
+    absprecisiongoal = 1.0
+    # resume from previous integration snapshot
+    readin = .false.
+    # write histograms and results after each vegas iteration
+    writeintermediate = .true.
+    # warmup precision goal in percent (default: 25%)
+    # unless this precision is reached, the number of calls will be
+    # increased and the warmup runs again
+    warmupprecisiongoal = 0.75
+    # warmup chisq goal (default: 2.5)
+    # unless this value of chisq/it is reached, the number of calls will be
+    # increased and the warmup runs again
+    warmupchisqgoal = 2.5
+    ndmx = 30
+    iterbatchwarmup = 15
+    initcallsnloreal = 8000000
+    initcallsnlovirt = 2000000
+
+# process specific initializations
+
+# Single top SMEFT, nproc=164, 169
+[singletop]
+    # C_phiq (O1), real-valued
+    c_phiq = 0
+    # C_phiphi (O2), real and imaginary part
+    c_phiphi = 0.0 0.0
+    # C_tW (O3), real and imaginary part
+    c_tw = 0.0 0.0
+    # C_bW (O4), real and imaginary part
+    c_bw = 0.0 0.0
+    # C_tG (O6), real and imaginary part
+    c_tg = 0.0 0.0
+    # C_bG (O7), real and imaginary part
+    c_bg = 0.0 0.0
+    # Lambda, scale of EFT breakdown in GeV
+    lambda = 1000
+    # enable 1/Lambda^4 contributions
+    enable_lambda4 = .false.
+    # disable Standard Model contributions
+    disable_sm = .false.
+    # anomalous couplings mode (only LO)
+    mode_anomcoup = .false.
+
+# Anomalous couplings of the W and Z
+[anom_wz]
+    # enable anomalous W/Z couplings
+    enable = .false.
+    # Delta g1(Z)
+    delg1_z = 0
+    # Delta K(Z)
+    delk_z = 0
+    # Delta K(gamma)
+    delk_g = 0
+    # Lambda(Z)
+    lambda_z = 0
+    # Lambda(gamma)
+    lambda_g = 0
+    # h1(Z)
+    h1Z = 0
+    # h1(gamma)
+    h1gam = 0
+    # h2(Z)
+    h2Z = 0
+    # h2(gamma)
+    h2gam = 0
+    # h3(Z)
+    h3Z = 0
+    # h3(gamma)
+    h3gam = 0
+    # h4(Z)
+    h4Z = 0
+    # h4(gamma)
+    h4gam = 0
+    # Form-factor scale, in TeV
+    tevscale = 2.0
+
+# Higgs+jet with mass corrections, process 200
+[hjetmass]
+    mtex = 0
+
+[anom_higgs]
+    # Gamma_H / Gamma_H(SM)
+    hwidth_ratio = 1.0
+    cttH = 1.0
+    cWWH = 1.0
+
+[dipoles]
+    alpha = 1.0
+
+[extra]
+    verbose = .true.
+    nohistograms = .false.
+
+# for NNLO
+[singletop]
+    nnlo_enable_light = .true.
+    nnlo_enable_heavy_prod = .true.
+    nnlo_enable_heavy_decay = .true.
+    nnlo_enable_interf_lxh = .false.
+    nnlo_enable_interf_lxd = .false.
+    nnlo_enable_interf_hxd = .false.
+    nnlo_fully_inclusive = .false.